1. Check desired wall location for wiring and
     plumbing that could mater.
     Locate and mark studs & close stud
     spacing.

 2. Measure desired height location.

 3.  Draw out level lines to cut wall 
     14” wide x 50” high.

 4. Cut dry wall in between wall studs.

 5. Clean out opening of drywall dust.

 6.  Slide Closet Vault into cut out

7. Pre-drill holes into studs for screws.

   Fasten lag screws through Vault into stud.
   Minimum recommended screw size 1/4” x 1”.
   Screw size may vary depending on location.

 8. Install interior options.

       Check to be sure shelves and accessories
       do not interfere with lock and door closing.

  9. Set your personal combination.

     Enjoy your V-Line Closet Vault.

     For complete concealment hang a
     picture over the Closet Vault.